Function: Gluning unit ,End trimer ,Fine trimer ,Edge scraper,Buffing unit
1.FK50 is designed for industrial use and specifically for jointing, edge banding and fine-finishing of edgings.
2.All processing schedules can be preset and stored according to the processing materials and process requirements.
3.Easy one-person operation through automation of essential functions.

Function: Gluing unit ,End trimer ,Fine trimer ,Edge scraper,Corner Rounding,Buffing unit
1. Guided multi-function control interface, pneumatic control, no manual tool adjustment, and the fastest feed speed is 32m/min. It is very easy to use and does not require special job skills training.
2. With tracking function, the 4 corners of the side bands of the plate are milled into R arcs to increase the aesthetics of the plate corners
3. Digital temperature control and visual prompts are realized to ensure the best gluing effect, reduce waste and improve efficiency.

Function: Pre-milling,Gluing unit ,End trimer ,Fine trimer ,Edge scraper,Corner Rounding,Buffing unit
1.The edge bander FK53 is the flagship model of our edge bander line,with the addition of Pre Milling and Corner Rounding, this machine has all the features from QUICK CNC Edge bander.
2.Digital temperature control and visual prompt are realized to ensure the best gluing effect, reduce waste and improve benefit.
3. Module design concept, from the processing process to the selection of single parts, the maximum use of international common parts assembly, reduce the high manufacturing costs caused by special devices, and reduce the procurement costs of later accessories.

1.Edge banding machine FK61 has the function of separation and solves the problem of hot melt glue polluting the board surface after gluing.
2.Digital temperature control and visual prompt are realized to ensure the best gluing effect, reduce waste and improve benefit.
3.High speed tracking this equipment adopts the high-end configuration of two knife tracking, even when the equipment is running at high speed, it can still achieve accurate tracking (chamfer / fillet) effect stably.

1.Guided multi functional control interface, pneumatic control, no manual tool adjustment, feed speed of the fastest 30m / min, easy to use, no special post skills training.
2.The equipment is equipped with a pre-milling device, which can effectively repair the roughness of the incision when cutting, the cut is more flat, and the edge is naturally pasted more, making the glue water line more invisible.
3.High speed tracking this equipment adopts the high-end configuration of four knife tracking, even when the equipment is running at high speed, it can still achieve accurate tracking (chamfer / fillet) effect stably.

Quick CNC New product Laser edge banding machine. It has perfect edge banding effect. .It is more beautiful, especially for transparent panels such as white and other light-colored door panels such as acrylic, and the hardness and color of the functional layer of laser edge banding are consistent with the surface layer of the edge band, which can achieve seamless edge banding. The product quality is more stable, heat-resistant, moisture-resistant, mildew-proof, high added value, healthy and environmentally friendly, prolonging the service life of the product.