CONTACT US

TO  GET  A  NEW QUOTE

SEND
Edge Banding Machine

Heavy Duty Automatic Edge Banding Machine FK61

1.Edge banding machine FK61 has the function of separation and solves the problem of hot melt glue polluting the board surface after gluing.
2.Digital temperature control and visual prompt are realized to ensure the best gluing effect, reduce waste and improve benefit.
3.High speed tracking this equipment adopts the high-end configuration of two knife tracking, even when the equipment is running at high speed, it can still achieve accurate tracking (chamfer / fillet) effect stably.

Request A Quote 

INQUIRY

Product Description    

Heavy Duty Automatic Edge Banding Machine FK61,this equipment has rich functions of high quality, can provide high quality edge sealing effect.The maximum feed speed of this machine can reach 23m/min, and the high efficiency production is further pushed to the maximum. Even in the face of high-quality large-scale orders, we can still face it calmly, and the delivery time is fast.

Send Inquiry

Parameter

ModelFK61
Shape size7000x900x1730mm
Edge tape thickness0.4-3mm
Sheet length≥100mm
Total power12KW
Feed rate16-23m/min
Sheet thickness9-50mm
Sheet width≥60mm
Working air pressure0.7Mpa
Conveying transmissionGPG motor
PLCDelta
Air cylinderAirTAC

Accessories and Advantage

Pre-milling

After milling by milling mechanism, all kinds of defects on the machined surface can be removed, and the edge sealing can reach the best state.

Gluing system

Reasonable control of glue quantity, good thermal conductivity, stable operation, uniform coating, firmer adhesion and more perfect edge sealing effect.

Four pressure wheel pressing

Strong pressing force, edge banding is more suitable, scraping off the excess hot melt glue, making the glue line smaller and the edge banding effect more perfect.

Fast ending cutting

Fast cutting the front and rear edge banding, two saw blades are matched in front and back to achieve high precision and high efficiency.

The automatic oil filling system of the end aligning guide rail extends the service life of the equipment.

Fine trimming

The upper and lower sides of the edge banding are protruded from the upper and lower planes of the board, and the redundant edge banding is trimmed into an R-angle shape, so that the upper and lower edges of the edge banding are flush and smooth with the upper and lower surfaces of the board.

Double corner trimming

The edge fillet (chamfer) of plate is processed to make the four corners of plate smooth and beautiful.

Scraping

Remove the marks left by trimming knife and finish R fillet, pneumatic scraping.

Buffing

Throw away the excess glue mark to make the edge banding smoother and cleaner.

拼图4.jpg


拼图1.jpg


拼图3.jpg


拼图2.jpg


 Related Products

Contact Us

SEND

Got any questions?

If you have something on your mind, just let us know!
We are more than happy to answer all your inquiries.

Interested? Leave your contact details.